麻烦请英语高手帮忙翻译一下。急!谢谢了!!!
1 each year the quality of unity of purpose not consistent with the quality of customer agreements. They only prove that L'Assomption objective, non-performing rate of less than 1%. There is no agreement, the business need to communicate the Ministry of International Trade
2 confrontation tend not to achieve the goal of quality improvement goals without a proper action continued to improve, the need for short-term goal "of the production process"
3 quality system for quality control procedures have been established for (BR-Q-63), and costs from the financial sector supervision. Quality of the total cost of sales of M%, this is relatively high because of instability in staff during the Spring Festival. From the Ministry of Finance Responsible for the monthly statistics, and provide goods-sector analysis of the reasons for "the Department of Finance Commodities"
4, 2007, the factory management regulations to the requirements and the DPPM DPPM in the report had not been read, and the related functions of communication. Traders hope that the timely provision of factories to the Ministry of International Trade
5 FMEAs with the correct input there is only one part of the whole FMEA, the FEMA-071108-07, the spraying process, called for wet enamel thickness of 100% of the entire seizure, in fact they only sample testing. Change the document for the Department
6 from the CA FEMA and update customers FMEA-071108-07 in the supporting bar to the correct location change operations should be updated. The content is not very clear, the need to communicate with customers
7 supplier selection and assessment of the nature of laws in iron foundries, there is no specific report on suppliers regularly assessed and good quality suppliers is the time table 2004.09.18. Some suppliers not included, to the foundry To review and additional information of the Health Centre
8 uninterrupted supply of performance monitoring to track the performance of suppliers to supervise the season, but Ottomans providers in 2007 fourth-quarter performance records should be able to find. Refresh supplier of materials related records
9 providers CA procedures only failed to notice only some of the content providers is not very clear, the need to communicate with customers
10 approved / part of effective / provider there is no clear evidence for approval / part of an effective, and they explained that most of the functions of Taiwan's R & D are completed. Refresh supplier of the first pieces of relevant records to confirm materials
11 changes to / from suppliers there is no evidence that the providers receive and to change the system of project management in the conduct. Refreshes and suppliers of the transceiver and revision of relevant records to confirm the materials
12 control plan required some guidance to implement, such as: Nien Ottomans in the process, they provided glue injection value is 0.09 + / -0.02, but no action to control this value. Change the packaging standards
13 workers did not operate in accordance with the provisions of documents in the enamel thickness inspection process in the note, the test should request the 36 point test, in fact, the test only tested seven points. The production staff of the Ministry of Education and Training
14 working environment not a very good working environment planning. For example: cast iron plant, enamel factory warehouse, enamel factory grinding room. Refreshes the scene of the environment sector
15 and control plan in line with statistical methods. 318361501 in the control plan was not mentioned in clear control method for controlling from the SPC plans to add control for the Department
16 parameters Cpk> 1.33? CPK data instability, some less than 1.0, some larger than 2.0. Such as enamel thickness spraying process CPK is 0.86. Thickness for the manual, CPK only in the application of the Department of goods
17 control table to give priority to maintain and inspect no enamel thickness low CPK added analysis to improve the maintenance of the report for the Department
18 investigation into the cause of changes in special operations and results of the content higher than 3.01 is not very clear, the need to communicate with customers
19 customer-tracking procedures to achieve the requirements of PPM, many from Electrolux L'Assomption (LAS-182, LAS-102, LAS-186, LAS-218, LAS-238, LAS-272, LAS-322, LAS - 330, LAS-345), some from Electrolux Springfield. V. passengers have to improve products for the Department20 packaging process to comply with the provisions of color different issues (SCAR345), to change the packaging is a relatively good packaging. Need to communicate with L'assomption (see right SCAR345 acts) has requested the Ministry of International Trade and customer communications for security Department
2 confrontation tend not to achieve the goal of quality improvement goals without a proper action continued to improve, the need for short-term goal "of the production process"
3 quality system for quality control procedures have been established for (BR-Q-63), and costs from the financial sector supervision. Quality of the total cost of sales of M%, this is relatively high because of instability in staff during the Spring Festival. From the Ministry of Finance Responsible for the monthly statistics, and provide goods-sector analysis of the reasons for "the Department of Finance Commodities"
4, 2007, the factory management regulations to the requirements and the DPPM DPPM in the report had not been read, and the related functions of communication. Traders hope that the timely provision of factories to the Ministry of International Trade
5 FMEAs with the correct input there is only one part of the whole FMEA, the FEMA-071108-07, the spraying process, called for wet enamel thickness of 100% of the entire seizure, in fact they only sample testing. Change the document for the Department
6 from the CA FEMA and update customers FMEA-071108-07 in the supporting bar to the correct location change operations should be updated. The content is not very clear, the need to communicate with customers
7 supplier selection and assessment of the nature of laws in iron foundries, there is no specific report on suppliers regularly assessed and good quality suppliers is the time table 2004.09.18. Some suppliers not included, to the foundry To review and additional information of the Health Centre
8 uninterrupted supply of performance monitoring to track the performance of suppliers to supervise the season, but Ottomans providers in 2007 fourth-quarter performance records should be able to find. Refresh supplier of materials related records
9 providers CA procedures only failed to notice only some of the content providers is not very clear, the need to communicate with customers
10 approved / part of effective / provider there is no clear evidence for approval / part of an effective, and they explained that most of the functions of Taiwan's R & D are completed. Refresh supplier of the first pieces of relevant records to confirm materials
11 changes to / from suppliers there is no evidence that the providers receive and to change the system of project management in the conduct. Refreshes and suppliers of the transceiver and revision of relevant records to confirm the materials
12 control plan required some guidance to implement, such as: Nien Ottomans in the process, they provided glue injection value is 0.09 + / -0.02, but no action to control this value. Change the packaging standards
13 workers did not operate in accordance with the provisions of documents in the enamel thickness inspection process in the note, the test should request the 36 point test, in fact, the test only tested seven points. The production staff of the Ministry of Education and Training
14 working environment not a very good working environment planning. For example: cast iron plant, enamel factory warehouse, enamel factory grinding room. Refreshes the scene of the environment sector
15 and control plan in line with statistical methods. 318361501 in the control plan was not mentioned in clear control method for controlling from the SPC plans to add control for the Department
16 parameters Cpk> 1.33? CPK data instability, some less than 1.0, some larger than 2.0. Such as enamel thickness spraying process CPK is 0.86. Thickness for the manual, CPK only in the application of the Department of goods
17 control table to give priority to maintain and inspect no enamel thickness low CPK added analysis to improve the maintenance of the report for the Department
18 investigation into the cause of changes in special operations and results of the content higher than 3.01 is not very clear, the need to communicate with customers
19 customer-tracking procedures to achieve the requirements of PPM, many from Electrolux L'Assomption (LAS-182, LAS-102, LAS-186, LAS-218, LAS-238, LAS-272, LAS-322, LAS - 330, LAS-345), some from Electrolux Springfield. V. passengers have to improve products for the Department20 packaging process to comply with the provisions of color different issues (SCAR345), to change the packaging is a relatively good packaging. Need to communicate with L'assomption (see right SCAR345 acts) has requested the Ministry of International Trade and customer communications for security Department
麻烦英语高手帮忙翻译下.谢谢
由政府出资建造的亚运村很好地显现了广州在场馆安排上的实用性。为了能在亚运会闭幕后继续发挥作用,该项目被设计成了一座全功能的卫星城。
麻烦帮忙请英语高手翻译一下 !抱拳感谢!
这就是简单的快递跟踪。最后顺利签收了。
供参考。